Bumper- Rear

• 11-Gauge US Steel Construction
• Retain OEM Receiver Hitch And Wiring
• Pre-Cut Openings To Utilize Factory Sensors
• 100 Pct. Made In The USA

See All

• Integrates The Existing Receiver Hitch
• Back Up Lights
• Back Up Sensor Holes
• Retains Receiver Hitch And Wiring Locations
• Pipe And Formed Treadplate
• Gloss Black Powder Coat

See All

• Combination Pipe And Tread Plate Construction
• Gloss Black Powder Coat
• Back Up Lights Included
• Pre-Drilled Sensor Holes
• Retains OEM Receiver Hitch And Wiring Locations
• MADE IN THE USA

See All

• 10-Stage Variable Valving
• High Pressure Nitrogen Charged
• Protects Vehicle From On And Off-Road Debris
• D-rings Included - 4.75 Ton Capacity
• D-Ring Mounts Welded Inside And Out For Increased Strength
• Black Finish

See All

• Low-Profile Desert Racing Design
• Two Light Mounts that Fit 3 In. Light Pods
• Fits up to a 37 In. Spare Tire
• Tube And Plate Steel Construction
• Paintable Aluminum Accent Panels
• Retains Full Functionality Of Oem Backup Sensors
• Accommodates Factory Tow Hitch
• Bolt-On Installation

See All

• 100 Percent Made In Texas USA
• Standard Premium 5-Stage Satin Black Powder-Coat Finish
• Has Recessed Light Pods For 2X Rigid SRM Backup Lights
• Has Recessed Light Pods For QuakeLED QQU451
• Special Order Options Include Tire Carrier /Corner Guard Upgrades

See All

• Flat Black Powder Coat
• Back Up Sensor Holes
• Retain OEM Receiver Hitch And Wiring Locations
• Pipe And Formed Smooth Plate Steel

See All

• Paintable
• Back Up Sensor Holes
• Retain OEM Receiver Hitch And Wiring Locations
• Pipe And Formed Smooth Plate Steel

See All

• Made In America And Proudly Built In Texas
• 7-Gauge Steel
• .25 in. Mounting Brackets And Internal Bracketry
• Direct Bolt-On Design
• Sensor Compatible
• Integrated 8 in. Accent LED Light
• 3 in. Cube Light Mounts
• Corner Step
• Integrated Blind Spot
• Bolt-On Steel Step Plates
• Textured Satin Black Powder Coat
• Lifetime Structural Warranty

See All

• Higher Than Factory Ground Clearance
• 3.5 mm Steel Plates w/ 5 mm. Steel Supports
• Micro-Texture Black Powder Coat Finish
• Dual Clevis Mounts for 3/4 in. D-Ring Shackles
• Retains Factory Backup Sensors

See All

• Jeep Mid-Width Rear Bumper
• Mounts For 3 in. Light Pods
• 1 in. Thick D-Ring Mounts
• Compatible With Factory Hitch
• Fits Up To 37 in. Spare Tire / Max 4.5 in. Backspacing Wheels
• Welded Zip-Tie Tabs For Clean Wire Management
• Micro-Texture Black Powder Coat
• Paintable Aluminum Accent Panels
• Fully Bolt-On Installation

See All

• Integrated Steps On Either Side Of The Tailgate
• Durable Formed 3/16in. Steel Construction
• Retain OEM Receiver Hitch And Wiring Locations
• 3/4in. D-Ring Recovery Points
• 2 Stage Black Powder Coat

See All

• Easy To Install!
• Durable; Steel Construction
• Incl. [2] Rough Country Led Cubes
• Integrated Steps For Easy Access To Bed
• Retains Factory Receiver Hitch
• Incl. Backup Sensor Relocators

See All

• Identity Jeep Rear Bumper

See All

• iDentity Bumper Components

See All

• Truly Modular Design For Customization
• Optional Shackle Or Non-Shackle Mount End Pods Available
• Avail. Mesh And Trim Ring Inserts w/Integrated Parking Sensors
• Integrated 8 in. Accent Led Lighting w/Preparatory Control Module
• Accommodates w/Factory Hitch And Tow Point
• Allows For Multitude Of Rear Facing Light Options
• Constructed From High Quality Steel
• Made In USA

See All

• Identity Rear Bumper Shackle End Pods

See All

• 10-Stage Variable Valving
• Durable Steel Construction
• Includes 2 Rough Country Led Cubes
• Integrated Steps For Easy Access To Bed
• Retains Factory Receiver Hitch
• Includes Backup Sensor Relocators

See All

• 2 Clevis Mounts That Take 3/4 In. D-Rings
• Includes Paintable Aluminum Inserts
• Utility Steps Located On Each Corner For Easier Bed Access
• Parking Sensors Are Retained
• Gusseted Construction For Strength
• Direct Fit Bolt-On Installation

See All

• Integrates With Existing Receiver Hitch
• Formed Steel Durability
• Gains Lower Steps And Recovery Points
• Stylish And Functional

See All

• Integrates With Existing Receiver Hitch
• Formed Steel Durability
• Gains Lower Steps And Recovery Points
• Stylish And Functional

See All

• Rear Bumper

See All

• 1/4 in. And 3/16 in. Steel Construction
• 2 Stage Powder Coat Finish
• DV8 No Hassle Warranty
• Lights Included

See All

• Aggressive Styling
• Integrated Tow Hooks And D-Ring Mounts
• Double Rung Side Step
• Fab Fours Signature Knife Edge Design
• Ease Of Installation
• Includes 16 Gauge Removable Skin
• Sensor Compatible
• 2 Integrated Pod Mounts For Reverse Lights
• Stainless Steel Hardware
• 2 Stage Matte Black Powder Coat
• 11 Gauge Steel Construction
• MADE IN THE USA

See All

• Rear Bumper Kit

See All

• Slim Design
• Textured 3 Stage Powdercoat
• Solid Steel Construction
• Light Weight
• Bolt On Installation
• Standard Dv8 Warranty
• Aluminum Vents Can Be Color Keyed To The Jeep

See All

• Easy Bolt-on Installation.
• Aggressive Appearance.
• Incl. [2] Rough Country Led Cubes
• Incl. D-rings
• Retains Factory Receiver Hitch

See All

• Aggressive Design
• Winch Ready- Will Hold Up To 16.5K Winch (Depends On Vehicle)
• Perfectly Follows The Body Lines
• Side Mounting Slots And Tabs For Various Light Options
• Provides Far More Tire Clearance
• Integrated Shackle Mounts

See All

• Manufactured From Durable 5/32 Steel And 2x.120 Tubing
• Protects Vehicle From On And Off-Road Debris
• Incl. D-Ring Set
• Satin Black Finish
• Installation Hardware Included

See All

• 11-Gauge Main Body
• 7-Gauge Bracketry
• Louvered Recesses For Reduced Drag
• Sensor Compatible
• Direct Bolt On Application
• Block Off Plate w/Stainless Hardware For No Lighting Option
• High Clearance Bumper
• Formed To Fit The Contours Of Vehicle
• CNC Laser Cut
• Made In America

See All

• Spartan Rear Bumper

See All

• Direct Fit That Enhances Factory Styling
• Compatible With Factory Hitch
• Features Welded-In Zip Tie Tabs For Clean Wire Management
• Fully Bolt-On Design That Doesnt Require Modification Or Drilling
• Aluminum Backed Logo
• Mounts 3 in. Light Pods
• Features 1 in. Thick D-Ring Mounts That Accept A 7/8 in. Pin
• Up To A 37 in. Spare Tire Will Fit Above The Bumper On The OEM Carrier
• Compatible With All Trim Levels
• Micro-Texture Black Powder Coat
• Satin Black Accent Panel
• All Mounting Hardware Is Included

See All

• Standard Rear Bumper

See All

• Made In American And Texas Strong USA
• 3/16 in. Heavy Duty Steel Construction
• 1/4 in. Gusseting And Internal Bracketry
• CNC Laser Cut
• Precision Brake Formed
• Welded By Craftsmen Inside And Out
• Direct Bolt On Design
• Includes License Plate Lights
• Light Ports For Led Backup Lights
• Standard Premium 5-Stage Satin Black Powder-Coat Finish

See All

• Made In American And Texas Strong USA
• 3/16 in. Heavy Duty Steel Construction
• 1/4 in. Gusseting And Internal Bracketry
• CNC Laser Cut
• Precision Brake Formed
• Welded By Craftsmen Inside And Out
• Direct Bolt On Design
• Includes License Plate Lights
• Light Ports For Led Backup Lights
• Standard Premium 5-Stage Satin Black Powder-Coat Finish

See All

• Made In Texas USA
• 3/16 in. Heavy Duty Steel Construction
• 1/4 in. Gusseting And Internal Bracketry
• CNC Laser Cut
• Precision Brake Formed
• Welded By Craftsmen Inside And Out
• Direct Bolt On Design
• Includes License Plate Lights
• Light Ports For Led Backup Lights
• Standard Premium 5-Stage Satin Black Powder-Coat Finish

See All

• Made In American And Texas Strong USA
• 3/16 in. Heavy Duty Steel Construction
• 1/4 in. Gusseting And Internal Bracketry
• CNC Laser Cut
• Precision Brake Formed
• Welded By Craftsmen Inside And Out
• Direct Bolt On Design
• Superior Foot Forward Winch Mount Fits WARN M8000 Or 9.5XP
• Includes License Plate Lights
• Light Ports For Led Backup Lights
• Standard Premium 5-Stage Satin Black Powder-Coat Finish

See All

• Safely Holds Up To 37 In. Tires
• Innovative Swing-Out System
• Includes 3rd Brake Light Relocation Bracket
• Includes License Plate Relocation Bracket
• Durable Steel Construction

See All

• Made In American And Texas Strong USA
• Schedule 40 Pipe For Center Structure
• 11 Gauge Shell w/1/4 in. Heavy Duty Mounting System
• CNC Laser Cut
• Precision Brake Formed
• Welded By Craftsmen Inside And Out
• Direct Bolt On Design
• Recessed Light Ports For Flush Or Surface Mount Led Cubes
• Mounting Holes For License Plate
• Standard Premium 5-Stage Satin Black Powder-Coat Finish

See All

• Made In America And Proudly Built In Texas
• 11-Gauge Steel
• 1/4 in. Internal Bracketry
• Schedule 40 Pipe
• Direct Bolt-On Design
• Recessed Light Ports For Flush Or Surface Mount Led Cubes
• Sensor Compatible
• Textured Satin Black Powder Coat
• Lifetime Structural Warranty

See All

• Superior Strength And Styling
• Give Your Vehicle That Extra Cool Factor
• Two Front Side Openings Allow Light Options
• Sensor Compatible
• 11 Gauge US Steel

See All