Loading... Please wait...

Categories

Our Newsletter


Sort by:

Steering Components

  • PS Pump w/ Pulley (1650psi)
    $284.00 PS Pump w/ Pulley (1650psi)
    Rock Assault™ PS Pump w/Tacoma Serpentine Pulley Due to popular demand, Trail-Gear is now offering their 1,450 PSI and 1,650 PSI power steering pumps with the Tacoma Serpentine Pulley. The TC style power steering pumps...

  • PS Pump w/o Pulley (1650 psi)
    $284.00 PS Pump w/o Pulley (1650 psi)
    Reservoir and Bracket When installing a high flow pump such as the one listed above, it is important to use a larger reservoir to provide enough fluid when the system needs it. The stock reservoir is fine for the stock...

  • PS Reservoir
    $113.00 PS Reservoir
    Trail-Creeper™ Ring & Pinion Gears Looking for a Ring & Pinion that you can rely on even on the most punishing trails?  Trail-Gear is proud to offer Trail-Creeper Ring & Pinion Gears.  These are the very...

  • PS SERPENTINE PULLEY, 6-RIB, 5.5"
    $50.25 PS SERPENTINE PULLEY, 6-RIB, 5.5"
    Power Steering Serpentine Pulleys - 5-Rib or 6-Rib Our 5-Rib and 6-Rib Pulleys are designed to fit Power Flow power steering pumps and other power steering pumps with a .665”-.667” shaft. They are made out of 6061-T6...

  • PS SERPENTINE PULLEY, 6-RIB, 6"
    $50.25 PS SERPENTINE PULLEY, 6-RIB, 6"
    Power Steering Serpentine Pulleys - 5-Rib or 6-Rib Our 5-Rib and 6-Rib Pulleys are designed to fit Power Flow power steering pumps and other power steering pumps with a .665”-.667” shaft. They are made out of 6061-T6...

  • PS SERPENTINE PULLEY, 6-RIB, 6.5"
    $50.25 PS SERPENTINE PULLEY, 6-RIB, 6.5"
    Power Steering Pulleys - V-Belt Our V-Belt pulleys are designed to fit Power Flow power steering pumps and other power steering pumps with a .665”-.667” shaft. They are made out of 6061-T6 aluminum and anodized black for a...

  • PS V-BELT PULLEY, 6"
    $50.25 PS V-BELT PULLEY, 6"
    Rod Ends Threaded bungs are welded into tubing to create suspension and setting links. 1” and 1.25” bungs are for use on tubing with a 1.5” inner diameter. 5/8”, 3/4”, and 7/8” bungs are for use on tubing with a 1” inner...

  • Replacement Filter (fits 130565-1-Kit)
    $18.00 Replacement Filter (fits 130565-1-Kit)
    Reservoir and Bracket When installing a high flow pump such as the one listed above, it is important to use a larger reservoir to provide enough fluid when the system needs it. The stock reservoir is fine for the stock...

  • Reservoir Bracket with Hardware
    $49.50 Reservoir Bracket with Hardware
    Reservoir Filter Bracket Our Rock Assault™ Reservoir Filter Bracket bolts right to the back of our Rock Assault™ Reservoir Filter Kit (into the pre-tapped holes) and allows you to either weld the other side of the bracket to...

  • Reservoir Filter Bracket
    $37.00 Reservoir Filter Bracket
    Reservoir Filter Kit When you have invested thousands of dollars into your full hydraulic steering system, you will want to protect it with the best reservoir and filter that you can get. That is why Trail-Gear has...

  • Reservoir Filter Kit
    $306.75 Reservoir Filter Kit
    Rock Assault™ 3.0L V6 Power Steering Pump Kit We all know that the stock pump on a 3.0 is just not enough to turn big tires or run a ram assist and when you try and drill out the inlet to get more volume the result is a...

  • Weld-In Steering Rod Bungs LH
    $31.00 Weld-In Steering Rod Bungs LH
    Weld In Steering Rod Bungs Finally a weld in bung with the thread pitch of an FJ80 TRE, which is the most commonly used TRE in Toyota hi-steer kits. Once welded into your tie rod or drag link, this bung will allow you to...

  • Weld-In Steering Rod Bungs RH
    $31.00 Weld-In Steering Rod Bungs RH
    Weld-On Attachment Points Trail-Gear’s Weld-On Attachment Points are machined from Billet 1020 cold rolled steel. They come in two different fitments, one is coped on the bottom so that it can be welded on to a 3"...